Auto Finesse Iron Out Contamination Remover 500 ml Fallout Remover

Product detailed description

Auto Finesse Iron Out fallout removers are among the best products in the world in the automotive industry in recent years. Auto Finesse Iron Out intensively decontaminates your vehicle of airborne rust and brake dust before these particles cause serious damage. Brake dust and ferrous residues are a critical problem given the increasing volume of mass transit and elevated traffic levels. These tiny iron shards can embed themselves into virtually any surface, and if left untreated, they begin to corrode and degrade those surfaces. Auto Finesse Iron Out specifically dissolves these particles before damage to your vehicle becomes visible.

Auto Finesse Iron is a modern, pH-neutral, reactive gel formula that specifically targets iron-based contamination only. Unlike aggressive acids commonly used to remove ferrous particles — airborne rust — it is safe for use on all exterior surfaces including paint, aluminium, magnesium, stainless steel, anodised surfaces, chrome, glass, plastic, and even rubber surfaces. Iron also contains powerful degreasing agents that release road film, making it an ideal choice for the decontamination process.

Unlike other standard cleaners, Iron Out is enriched with agents that prevent subsequent contamination from adhering to the surface. The result is significantly slower re-contamination of wheel and body surfaces. Furthermore, thanks to its consistency, Iron Out can be used as an effective, performance-enhancing lubricant under a clay bar — something virtually unthinkable with other products. 

The premium solution for cleaning heavily contaminated wheels!

Application procedure for wheels:
1) Before application, ensure the surface is cool and dry.
2) Apply a fine mist to the surface and allow to dwell.
3) The product's effectiveness is indicated by a distinct colour change to purple, turning almost black in cases of heavy contamination.
4) Allow to dwell until the product is about to dry, then rinse off with a pressure washer.
5) If the surface is heavily contaminated, agitate the product using a detailing brush (no scrubbing with brushes or other abrasive accessories is necessary).
PS. Don't forget to clean the brake callipers. Iron Out handles even baked-on brake dust there with ease...

Application procedure for paintwork:

1. Wash the vehicle to remove all conventional dirt.
2. Before application, ensure the surface is cool and dry.
3. Apply a fine mist to the surface and allow to dwell.
4. The product's effectiveness is indicated by a distinct colour change to purple.
5. Allow to dwell until the product is about to dry, then rinse off with a pressure washer. When applying to paintwork, do not use any cloths or brushes.
6. If the paintwork is heavily affected by airborne rust, proceed directly to washing the vehicle with a pH-neutral shampoo without rinsing the product off beforehand.
7. Then rinse off together with the shampoo.

Volume: 500 ml

Price per unit